8000 Series

Type-I Reverse Osmosis Water System

Clinical Analyzers will only perform precise and repeatable tests if the feed water supplied to them is consistently of the highest quality. Tap water contains many different impurities like salt, organics, particles, silica and bacteria that can interfere with the analyzer test results. This is why GWT Water Deionizing systems are vital for tap water purification. GWT systems are specifically designed for today’s most demanding clinical analyzers.  The GWT 8000 Series unit utilizes multiple technologies to produce consistently pure water at flow rates of 40-120 LPH.  

All GWT systems combine a pre-purification module, RO membranes, a polishing mixed bed cartridge, a sterile bacteria extraction filter and a UV disinfection chamber. A precision pump system maintains proper circulation of the water to ensure the highest quality water is constantly available for the analyzer. GWT units are available with 80 liter tanks constructed of virgin polypropylene. Each system component which comes in contact with the pure water is made from inert materials.  Every known step is taken to  insure the highest water quality. GWT water quality and purity levels meet or exceed standards set by the, CAP/CLSI Type I, ASTM Type 3 and ISO 3696.

  • Pure Water Production at 15° C 70/110 lph

  • CFU Reduction 99%

  • Recovery Rate 97% max

  • Operating Pressure 150 – 220 psi

  • Resistivity 18.2 Megohms

  • Feed Water Requirements 4 bar / <500 micros

  • Machine Dimensions 21H X 14W X 24D

  • Tank Dimensions 21H X 14W X 24D

  • Power requirements 110 V (with a UPS is preferred)

  • Pressurized Distribution 15-70 psi

Product Description

GWT 8070 / 8110 Series produce high quality water with minimal energy consumption. Use of low energy membranes provide highly efficient and economical operation. High quality material standards guarantee long service life. GWT 8000 series systems utilize proven state of the art pump technology. Automatically activated, user friendly maintenance alerts notify the operator when system service is required. Storage tanks are included with the GWT 8000 series systems to provide additional water volume during times of high demand.

The storage tank can also be used to supply water for other lab equipment. The storage tank allows higher volumes of water to be used for short periods that would otherwise be limited to the system production rate. A storage tank basically guarantees that water is available when needed. Proper storage tank sizes and system configurations will be recommended (or required) by GWT.  The desired tank size will be based on your combined analyzer applications and water volume specifications to ensure optimum service from the equipment.

We provide a storage tank appropriate to your needs, with all of our medical, laboratory and industrial systems. Our tanks come complete with pump, level control and vent. These purified water resistant polyethylene tanks, can operate on a bench or are stackable on the lab floor. Connections are available for filling an automatic laboratory washing machine. Level control is included with two switch points for automatic on / off of the GWT 8000 series. The tank level is indicated by continuous display on the device panel.

Ultra-Pure Water Storage Tank

21st Century Feed Water Systems
Type-I, Reverse Osmosis Water System

Clinical Analyzers will only perform precise and repeatable tests if the feed water supplied to them is consistently of the highest quality. Tap water contains many different impurities like salt, organics, particles, silica and bacteria that can interfere with the analyzer test results. This is why GWT Water Deionizing systems are vital for tap water purification. GWT systems are specifically designed for today’s most demanding clinical analyzers.  The GWT 7000 Series unit utilizes multiple technologies to produce consistently pure water.

All GWT systems combine a pre-purification module, RO membranes, a polishing mixed bed cartridge, a sterile bacteria extraction filter and a UV disinfection chamber. A precision pump system maintains proper circulation of the water to ensure the highest quality water is constantly available for the analyzer. GWT units are available with 80 liter tanks constructed of virgin polypropylene. Each system component which comes in contact with the pure water is made from inert materials.  Every known step is taken to  insure the highest water quality. GWT water quality and purity levels meet or exceed standards set by the, CAP/CLSI Type I, ASTM Type 3 and ISO 3696

7000 Series

GWT 7000 Series produce high quality water with minimal energy consumption. Use of low energy membranes provide highly efficient and economical operation. High quality material standards guarantee long service life. GWT 7000 series systems utilize proven state of the art pump technology. Automatically activated, user friendly maintenance alerts notify the operator when system service is required. Storage tanks are included with the GWT 7000 series systems to provide additional water volume during times of high demand.

The storage tank can also be used to supply water for other lab equipment. The storage tank allows higher volumes of water to be used for short periods that would otherwise be limited to the system production rate. A storage tank basically guarantees that water is available when needed. Proper storage tank sizes and system configurations will be recommended (or required) by GWT.  The desired tank size will be based on your combined analyzer applications and water volume specifications to ensure optimum service from the equipment.

Product Description
  • Local Service Representation

  • CAP/CLSI Type-1 Water

  • Lowest Decibel Level

  • Lowest Energy Consumption

  • Made in USA

  • Continuous Decontamination

  • Smallest Footprint

  • Predictable Operating Costs

  • In-House DI Conditioning

  • Green Technology

  • 24/7 Tech Support

4000 Series

Type-I Reverse Osmosis Water System

Clinical Analyzers will only perform precise and repeatable tests if the feed water supplied to them is consistently of the highest quality. Tap water contains many different impurities like salt, organics, particles, silica and bacteria that can interfere with the analyzer test results. This is why GWT Water Deionizing systems are vital for tap water purification. GWT systems are specifically designed for today’s most demanding clinical analyzers. The GWT 4000 Series unit utilizes multiple technologies to produce consistently pure water at flow rates of 10-40 LPH.

 

All GWT systems combine a pre-purification module, RO membranes, a polishing mixed bed cartridge, a sterile bacteria extraction filter and a UV disinfection chamber. A precision pump system maintains proper circulation of the water to ensure the highest quality water is constantly available for the analyzer. GWT units are available with 80 liter tanks constructed of virgin polypropylene. Each system component which comes in contact with the pure water is made from inert materials.  Every known step is taken to  insure the highest water quality. GWT water quality and purity levels meet or exceed standards set by the, NCCLS Type I, ASTM Type 3 and ISO 3696.

Ultra-Pure Water Storage Tank

We provide a storage tank appropriate to your needs, with all of our medical, laboratory and industrial systems. Our tanks come complete with pump, level control and vent. These purified water resistant polyethylene tanks, can operate on a bench or are stackable on the lab floor. Connections are available for filling an automatic laboratory washing machine. Level control is included with two switch points for automatic on / off of the GWT 4000 series. The tank level is indicated by continuous display on the device panel.

  • Pure Water Production at 15° C 20/40 lph

  • CFU Reduction 99%

  • Recovery Rate 97% max

  • Operating Pressure 150 – 220 psi

  • Resistivity 18.2 Megohms

  • Feed Water Requirements 4 bar / <500 micros

  • Machine Dimensions 21H X 14W X 24D

  • Tank Dimensions 21H X 14W X 24D

  • Power requirements 110 V (with a UPS is preferred)

  • Pressurized Distribution 15-70 psi

Product Description

GWT 2000 Series Ultra Small Footprint
Produce pure water at 7-20 LPH
Type-I Reverse Osmosis Water System

A counter top sized system that out performs much larger systems. Clinical Analyzers will only perform precise and repeatable tests if the feed water supplied to them is consistently of the highest quality. Tap water contains many different impurities like salt, organics, particles, silica and bacteria that can interfere with the analyzer test results. This is why GWT Water Deionizing systems are vital for tap water purification. GWT systems are specifically designed for today’s most demanding clinical analyzers. The GWT 2000 Series unit utilizes multiple technologies to produce consistently pure water at flow rates of 7-20 LPH. 

“The GWT 2000 Series System is the ideal water purification system for labs where space constraints exist, yet water purity standards remain uncompromised.” – Judy Lindsey, President

2000 Series

All GWT systems combine a pre-purification module, RO membranes, a polishing mixed bed cartridge, a sterile bacteria extraction filter and a UV disinfection chamber. A precision pump system maintains proper circulation of the water to ensure the highest quality water is constantly available for the analyzer. GWT units are available with 80 liter tanks constructed of virgin polypropylene. Each system component which comes in contact with the pure water is made from inert materials.  Every known step is taken to  insure the highest water quality. GWT water quality and purity levels meet or exceed standards set by the, NCCLS Type I, ASTM Type 3 and ISO 3696.

GWT 2000 Series produce high quality water with minimal energy consumption. Use of low energy membranes provide highly efficient and economical operation. High quality material standards guarantee long service life. GWT 2000 series systems utilize proven state of the art pump technology. Automatically activated, user friendly maintenance alerts notify the operator when system service is required.

The storage tank can also be used to supply water for other lab equipment. The storage tank allows higher volumes of water to be used for short periods that would otherwise be limited to the system production rate. A storage tank basically guarantees that water is available when needed. Proper storage tank sizes and system configurations will be recommended (or required) by GWT.  The desired tank size will be based on your combined analyzer applications and water volume specifications to ensure optimum service from the equipment.

Product Description
GWT PRODUCTS

Like many industries and systems top performance in Clinical Analyzers can only be achieved if the feed water supplied to them is of the highest quality. Tap water contains different impurities like salt, organics, particles, silica and bacteria that can interfere with the analyzer test results. General Water specializes in removing these impurities to keep our client partners facilities running smoothly.

  • Continuous  Decontamination

  • Counter top Convenience

  • Green Technology

  • 24/7 Tech Support

  • Local Service Representation

  • CAP/CLSI Type-1 Water

  • Pure Water Production at 15° C 7/20 lph

  • Machine Dimensions 22H X 14W X 24D

  • Power requirements 110 V (with a UPS is preferred)

 

21st Century RO Water System

Clinical Analyzers will only perform precise and repeatable tests if the feed water supplied to them is consistently of the highest quality. Tap water contains many different impurities like salt, organics, particles, silica and bacteria that can interfere with the analyzer test results. This is why GWT Water Deionizing systems are vital for tap water purification. GWT systems are specifically designed for today’s most demanding clinical analyzers.  The GWT 9000 Series unit utilizes multiple technologies to produce consistently pure water at flow rates of 390+ LPH.  

All GWT systems combine a pre-purification module, RO membranes, a polishing mixed bed cartridge, a sterile bacteria extraction filter and a UV disinfection chamber. A precision pump system maintains proper circulation of the water to ensure the highest quality water is constantly available for the analyzer. GWT units are available with 80 liter tanks constructed of virgin polypropylene. Each system component which comes in contact with the pure water is made from inert materials.  Every known step is taken to  insure the highest water quality. GWT water quality and purity levels meet or exceed standards set by the, CAP/CLSI Type I, ASTM Type 

9000 Series

GWT 9000 Series produce high quality water with minimal energy consumption. Use of low energy membranes provide highly efficient and economical operation. High quality material standards guarantee long service life. GWT 8000 series systems utilize proven state of the art pump technology. Automatically activated, user friendly maintenance alerts notify the operator when system service is required. Storage tanks are included with the GWT 8000 series systems to provide additional water volume during times of high demand.

The storage tank can also be used to supply water for other lab equipment. The storage tank allows higher volumes of water to be used for short periods that would otherwise be limited to the system production rate. A storage tank basically guarantees that water is available when needed. Proper storage tank sizes and system configurations will be recommended (or required) by GWT.  The desired tank size will be based on your combined analyzer applications and water volume specifications to ensure optimum service from the equipment.

Product Description
  • Local Service Representation

  • Prolongs Surgical Instrument Usage

  • Extends Sterilizer Equipment Life

  • Made in USA

  • 390+ LPH Rinse Water Delivery Flow

  • Protects Stainless Steel Passive Layer

  • No Harsh Chemical Assault on the Environment

  • 24/7 Technical Support

 
 
 
 

© 2018 by General Water Technologies.

  • Facebook - Grey Circle
  • LinkedIn - Grey Circle